Description

This keyless main switch for your bike can be connected with a fingerprint sensor or with an RFID antenna. The Easy Keyless FP comes with a fingerprint sensor what contains a 25 mm thread with nut what makes the implementation in your bike as easy as possible. The module can learn 2 fingers.

The activation of the module is made via a press on a button. Now you have 15 seconds time to lay your finger on the sensor. A violet ring around the sensor indicates the waiting state of the module. If the finger is recognised then the LED ring changes to blue colour and the power for the bike is switching on. If the finger is not recognised, then the module fall back into sleep mode in order to reduce the power consumption of the bike to a minimum.

If you use a control box from Axel Joost, then there is no need to wire an extra button to the module. The Easy Keyless FP has an extra output which simulates the function of a start button, resulting that you can use your original start button at the bike also for the activation of the module.

We suggest using the sensor in the following way in order to increase the reliability:

It makes sense to dry the sensor and the finger a bit with a cloth if you drive in rainy weather.

You can save the same finger more than one time if it is not good recognised.

The recognition of a middle finger has the highest score, following the index finger and the ring finger.

Save prior the right fingers if you are right – handed.

An injured finger is not easily recognised.

Install the sensor somewhere on a place which is easy to reach.