Lunchbox adaptor for BMW K – Models
£86.29
The Lunchbox – Adapter allow the connection of different new speedos on the old harness connector what was connected to the old BMW speedo in older K models. It makes the conversion of the old harness signals to a modern speedo easy.
Available on back-order
Description
Description
The Lunchbox – Adapter allows the connection of different new speedos on the old harness connector which was connected to the old BMW speedo in older K models. It makes the conversion of the old harness signals to a modern speedo easy.
The speed signal is amplified and now compatible to aftermarket speedos. 10 output cables allow to indicate all necessary signals. The neutral signal is now compatible to modern speedos and the virtual load for the alternator is implemented as well.
The reserve LED for models up to 1985 is flashing when the fuel level is below 7 litre and it is continuously on when the fuel level is below 4 litre. For K-models after 1985 is the reserve LED flashes when the fuel level is below about 7 litre.
An integrated status LED indicates the function of the speed sensor, the neutral position and the reserve fuel level. The housing is from a 3D printer and it´s waterproof with epoxy glue potted.
| Dimensions: | 59 mm length x 52 mm wide x 13 mm height w/o connectors |
| Body material: | shock resistant PLA plastic, 3D printed |
| Case Colour: | Black |
| Connections: | 0,14 qmm, 20 cm to the new speedo, 2 x 12 pin to original harness |
| Maximum temperature: | 80 degree Celsius |
| Input voltage range: | 7 – 18 Volt |
Additional information
Additional information
| Weight | .25 kg |
|---|---|
| Dimensions | 24 × 17 × 8 cm |
